.avif)
Profile Showcase
On a slate roof, the profile and the colors come from the manufacturer. We carry three metal slate products, each built and finished its own way. Pick a color under any product to see that panel in that finish.
Modern Metal Roofing · Metal Slate Series
Modern Metal Roofing's slate profile, stamped from steel and also offered in aluminum for coastal work. The finish is the same powder coat over a Kynar paint base used on their shake, electrostatically charged and heat-cured into a hard, granulated surface that holds color without granule loss. Offered in the same twelve colors as the Modern Metal shake.
ProVia · Metal Slate
ProVia's metal slate stamps galvanized steel into a dimensional slate profile, with a printed and stamped finish so panels read like quarried slate at a fraction of the weight. The GalvaTec finish resists fading, chalking, and corrosion, and each color pairs with coordinating trim. Five colors.
Arrowline · Aluminum Slate Shingle
Arrowline's aluminum slate shingle from Classic Metal Roofing Systems, with an interlocking design that locks on all sides for wind resistance and installs over most existing roofs. It comes in seven solid colors and six multi-tone slate blends.
Solid colors
Slate blends
Profile Showcase
On a shake roof, both the profile and the colors come from the manufacturer, and we carry five. They are built in different ways: powder-coated steel, stone-coated steel, molded polymer, and printed-and-stamped steel. That changes the texture, the weight, the color range, and how the finish ages. Pick a color under any product to see that panel in that finish.
The quick comparison. Each product is detailed below.
| Product | Construction | Finish | Wind / Fire | Impact | Warranty |
|---|---|---|---|---|---|
| Modern Metal | 24-ga steel / aluminum | Powder-coat or smooth | Non-comb. | Impact resistant | 50+ yr |
| DECRA Shake XD | 26-ga ZINCALUME steel | Stone granule | 120 mph / Class A | Class 4 | Lifetime + 30-yr |
| DaVinci Multi-Width | Polymer composite | Molded resin | 110 mph / Class A | Class 4 | Lifetime / 50-yr |
| ProVia | 26-ga galv. steel | Printed + stamped | 180 mph | Impact tested | Lifetime |
| TEK Hurricane | Stone-coated steel | Stone granule | CAT5 (E1592) | 2-in hail | - |
Modern Metal Roofing · Metal Shake Series
A 24-gauge steel panel stamped in a dimensional wood-shake pattern, also offered in .032 aluminum for coastal jobs. It comes in two finishes: a smooth painted finish, or Modern Metal's patented powder coat applied over a Kynar paint base, electrostatically charged and heat-cured into a hard, granulated surface.
Unlike stone coating, the powder coat bonds directly to the metal with no adhesive and no ceramic chips that can dislodge, so it holds its color without granule loss. An HD highlight treatment lays a second tone over the base for added depth.
What sets it apart The only powder-coated option, and the most finish flexibility: smooth or powder coat, plus HD highlight color pairings.
DECRA · Shake XD
A 26-gauge ZINCALUME (aluminum-zinc alloy) steel shake with an extra-dimensional profile built to mimic thick, hand-split cedar. The finish is ceramic-coated stone granules over an acrylic basecoat and primer, sealed with a clear overglaze, so the color sits in the granules rather than a printed layer.
DECRA's Cut and Tuck hidden-fastener design installs direct to deck and leaves a vented airspace behind the panel that adds insulation and helps with ice damming. Panels are walkable and will not crack, curl, or split.
What sets it apart The heaviest, most textured finish of the four, with a vented airspace for insulation. Florida and Miami-Dade approved.
DaVinci Roofscapes · Multi-Width Shake
The one composite in the group: a molded polymer shake, not metal. Tiles are cast from real hand-split cedar in five widths (9, 8, 7, 6 and 4 inch) and laid in a non-repeating pattern, with deep grooves and grain that read like wood up close.
The material is virgin resin with UV and thermal stabilizers and a built-in fire retardant. It carries the widest color range here, more than 50 shake colors that can be blended into a custom mix, with an optional Renaissance finish with Kynar for extra UV protection.
What sets it apart Closest to real cedar, the widest and most blendable color range, and the only non-metal option. Installs in cold weather, below 45F.
ProVia · Metal Shake
A 26-gauge galvanized steel shake, up to 30 percent thicker than comparable metal panels and about three times lighter than asphalt. The cedar look is a printed woodgrain finish accentuated by stamped graining, built from tens of thousands of surface impressions so no two panels read the same.
ProVia's GalvaTec finish resists fading, chalking, corrosion, and algae streaking, and a deflective coating keeps the surface cooler. Each color pairs with coordinating solid or decorative trim. Made in the USA from domestic recycled steel.
What sets it apart The most refined, even woodgrain, the highest wind rating at 180 mph, and a coordinating trim color program.
TEK Industries · Hurricane Metal Shake
TEK Industries' Hurricane Metal Shake is a stone-coated steel shake built for severe weather. Crushed-stone granules are bonded to a Galvalume steel base for the texture and color, over a profile stamped in a deep wood-shake pattern.
It is an exposed-fastener system that installs direct to deck or over battens, with a patented two-pound-density foam insert behind each panel that adds rigidity and dampens rain noise. TEK lists it as tested to ASTM E1592 at Category 5 wind speeds and rated to two-inch hail. A coastal upgrade adds an encapsulating resin backer for salt-air homes.
What sets it apart Built for severe weather: tested to Category 5 wind speeds under ASTM E1592, with a foam-backed panel and an optional coastal resin upgrade for salt-air homes.
* Made-to-order color. Standard colors are stocked; made-to-order colors carry added production time. We bring physical samples in your top colors before anything is ordered, so you see true tone and texture on your own roofline.
DECRA · Stone-Coated Tile
DECRA stone-coats its steel tile in two barrel profiles: the lower-relief Tile and the deep S-curve Villa Tile. Both are ZINCALUME steel finished with ceramic-coated stone granules. Pick a profile, then a color, to see that tile.
Lower-relief barrel wave with a softer curve, the classic Mediterranean tile look.
Deep S-curve barrel, the tallest profile, for an authentic Spanish clay-tile look with strong shadow lines.
DECRA is stone-coated steel: ceramic granules bonded over a ZINCALUME base, not a painted coat. Villa Tile Chestnut is made to order. We bring physical samples in your top colors before anything is ordered.
ProVia · Coated Steel Tile
ProVia stamps 26-gauge steel into a cascading Spanish-barrel profile, then finishes it with a Kynar 500 ceramic matte coat and a resin topcoat. Tongue-and-groove panels lock together over hidden fasteners, with no exposed screws. Pick a color to see the tile.
ProVia barrel tile is Kynar-coated stamped steel, not stone-coated: a low-sheen matte finish with a resin topcoat that resists algae and mildew, and about three times lighter than clay tile. We bring physical samples in your top colors before anything is ordered.
Worthouse · Coated Steel Tile
Worthouse stamps its tile in three profiles, each in German galvanized steel finished with their color-infused Noble Matte coating. The profile sets the shape; the color range differs by profile. Pick a profile, then a color, to see that tile.
Bold curved barrel profile, the most popular and traditional of the three.
Flat, low-profile tile with crisp linear shadow lines for a contemporary roofline.
Deep barrel profile that mimics Spanish clay tile, with strong diagonal shadow lines.
.webp)
Worthouse colors are infused into the Noble Matte coating, not stone granules. Same color program shown for each profile as Worthouse publishes it. We bring physical samples in your top colors before anything is ordered.
Modern Metal · Coated Steel & Aluminum Tile
Modern Metal forms its barrel tile in 24-gauge steel or .032 aluminum, then finishes it two ways: a smooth Kynar coat, or a patented powder coat over a Kynar base, electrostatically charged and heat-cured into a hard, granulated surface. Choose a finish, then a color.
Smooth is offered in twelve colors; the powder-coat finish in eight. Charcoal is not available on HD/XD powder panels. Colors shown are rendered and may differ slightly from the finished metal, so we bring physical samples in your top colors before anything is ordered.
Profile Showcase
The traditional profile lays steel shingles in standard horizontal courses, so the roof reads like dimensional architectural shingles up close while performing like metal. We carry two, each built and finished its own way. Pick a color under either product to see that panel in that finish.
GAF · Metal Roofing System
GAF's metal shingle, formed from Galvalume steel that pairs steel with aluminum and zinc for corrosion resistance. Panels interlock along their edges with a butyl seal and nail down with a standard coil gun, so an asphalt crew can install it in roughly half the time of standing seam. An embossed grain breaks up the surface to limit oil canning, and the field shingles are rated UL 2218 Class 4 for impact. Available across Tennessee in eight colors.
DECRA · Stone-Coated Steel
DECRA's stone-coated steel shingle, pressure-formed from aluminum-zinc alloy coated steel and surfaced with ceramic-coated stone granules sealed under a clear overglaze. Thick-cut edges and deep shadow lines give it the dimension of a heavy architectural shingle at about a pound and a half per square foot, light enough to often install over one existing layer. It carries a Class A fire rating, a UL 2218 Class 4 impact rating, and a lifetime limited warranty covering winds up to 120 mph. Four colors.
Profile Showcase
A traditional metal shingle lays flat to the roof in courses, the way an architectural asphalt shingle does, rather than standing up in a shake or barrel. It reads clean and dimensional from the street and sits naturally on a standard residential roofline. We carry two, built two different ways: a coated-steel shingle with an embossed grain, and a stone-coated steel shingle with thick-cut shadow lines.
GAF · TimberSteel
GAF forms TimberSteel from 24-gauge GALVALUME steel, an aluminum-zinc coated steel built to resist corrosion. An embossed vertical grain gives it the dimensional look of architectural shingles and limits the oil-canning that flat metal can show. The shingles interlock top and bottom with a butyl seal and nail down with a standard coil nailer over a plywood, OSB, or plank deck at a 3:12 slope or steeper.
It carries a UL 2218 Class 4 impact rating, the highest level, with ASTM D3161 Class F wind resistance and TAS-100 wind-driven rain approval. The ArmorPledge Limited Warranty runs 50 years on the material and 30 years on workmanship when installed by a GAF Metal Certified contractor.
DECRA · Shingle XD
DECRA forms Shingle XD from 26-gauge aluminum-zinc alloy steel, then finishes it with ceramic-coated stone granules over an acrylic basecoat and primer, sealed with a clear overglaze. The color sits in the granules rather than a printed layer, and the panel is pressed with thick-cut edges and deep shadow lines that read like a heavy architectural shingle.
Hidden fasteners and an interlocking course install direct to deck and leave a vented airspace behind the panel that adds insulation and helps with ice damming. It is Class A fire-rated with a Class 4 impact rating, and carries a lifetime limited warranty, a 120 mph wind warranty, and 30-year finish coverage.
Colors shown are rendered and may differ slightly from the finished metal, so we bring physical samples in your top colors before anything is ordered.