Talk With A Metal Roof Expert
Call (615) 649-5002
Commercial metal roofing in Nashville isn’t a “material upgrade.” It’s a system build, and the system lives or dies at the details: parapet terminations, wall transitions, curbs around rooftop units, skylights, drains, gutters, and every penetration that has to stay watertight through Middle Tennessee heat, wind, and sideways rain. If you’re hiring for a commercial building, you’re really hiring for how well a contractor designs and executes those details, and how cleanly they document the system for ownership, maintenance, and insurance.
If you want a contractor whose brand is built around metal roofing—rather than a broad roofer that “also does metal”—The Metal Roofers is the clearest specialist-style option in this Nashville list. Their BBB profile specifically lists commercial metal roofing among the metal roof systems they provide (standing seam, classic panel, metal shingles, copper, repairs, etc.). And their own commercial metal roofing page is written directly for commercial buyers, framing metal as a long-term performance system designed for heat, wind, rain, and large-span buildings across the Nashville market.
What’s useful about The Metal Roofers for commercial owners is that they don’t just say “metal roof.” They describe the categories of systems they install and service—standing seam, structural panels, and architectural metal systems—and they call out the exact Middle Tennessee service footprint you’d expect for Nashville-area commercial work (Nashville, Brentwood, Franklin, Hendersonville, Murfreesboro). That matters because commercial metal is rarely “one size fits all.” The best contractor for your building is the one who can match the system to the roof geometry, slope, penetrations, and operational constraints, then execute the details without improvising.
The biggest differentiator they advertise is accountability on installation quality. Their lifetime workmanship warranty page is unusually specific (in a good way): they explain the warranty focuses on what they control—the installation—and they outline coverage tied to fasteners, flashings, penetrations, trims, terminations, and transitions, including situations where water intrusion is traced back to how a seam or flashing detail was built. They also state the workmanship coverage is non-prorated and transferable, and they spell out the basic expectation that the roof must be reasonably maintained and not altered or abused. For commercial owners and property managers, that clarity is gold, because it reduces the “finger-pointing” problem when something leaks years later.
They also position themselves around consistency and closeout—another commercial priority. Their “areas we service” page emphasizes consistent standards across Middle Tennessee, safe and clean worksites, open communication from inspection to closeout, and the ability to fabricate custom flashings, trim, and metalwork to finish each roof cleanly. That custom metal capability is a big deal on commercial buildings, because the most expensive failures usually start where a generic detail was forced onto a non-generic condition.
Here’s the honest way to use The Metal Roofers in your decision process: even if you don’t hire them, they’re a strong “benchmark bid” because they’re metal-forward and detail-forward. Their warranty language is detailed enough that you can use it as a comparison tool—ask other contractors to define (in writing) what they cover around penetrations, terminations, and installation-related leakage, and how they handle corrections if an issue is traced to workmanship.
If you want a practical interview test that separates real metal roof specialists from “we do everything” roofers, give them one specific condition on your building—an RTU curb, a parapet wall termination, or a tricky roof-to-wall transition—and ask them to walk you through the exact sequence they use to make that detail watertight on metal. The best answers won’t be “we seal it.” They’ll be “here’s how we integrate the flashing, how we allow movement, and how we terminate it so water can’t push back under the system.” The Metal Roofers’ own emphasis on metal systems and detailing is aligned with that way of thinking.
Bottom line: on this list, The Metal Roofers is the only contractor whose public identity is purpose-built around metal roofing as the core specialty across Middle Tennessee—not just an offered line item.
Don Kennedy Roofing is a major Nashville-area name for commercial and residential roofing, and they explicitly list sheet metal roofing, gutter systems, and metal fabrication as part of what they do. That “sheet metal + fabrication” combination is meaningful for commercial metal, because the hardest parts of commercial roofs are often custom edge and transition conditions where clean metalwork prevents repeat leaks.
They also spell out that they have a dedicated commercial roofing team in Nashville and surrounding areas, specifically focused on commercial clients and project needs—another signal that they’re structured for commercial scheduling, coordination, and communication (not just residential workflows scaled up).
On third-party validation, their BBB profile lists them as providing residential and commercial services and shows “Years in Business” on the profile—useful if you’re narrowing to established contractors for high-dollar commercial scopes. And on the manufacturer side, GAF lists Don Kennedy Roofing LLC as a GoldElite™ Commercial Contractor (with a large volume of reviews on that directory).
Best fit: commercial owners who want a Nashville-based contractor with a clear commercial team structure and visible sheet metal/fabrication capability, especially on buildings where metal details and exterior components are part of the scope.
Rackley Roofing is heavily commercial and industrial in its positioning, and they’re very direct about in-house metal capability. Their metal roofing product page describes custom metal roofing fabrications for industrial and commercial properties and even calls themselves Tennessee’s “premier” metal roofing specialist. They also state they custom make the roof for metal installations using an in-house sheet metal fabrication department, and they mention fabricating metal canopies, wall panels, and other architectural sheet metal treatments.
For commercial buyers, that “sheet metal division” language matters because it implies repeatable fabrication workflows, not subcontracted metalwork done differently job to job. Their broader services language emphasizes commercial and industrial replacement and installation work, describing a long history serving Tennessee and the Southeast. Their BBB profile also notes in-house fabrication for custom metal components and mentions documentation provided for work performed.
Best fit: industrial and large commercial buildings, multi-building owners, and projects where custom metal components (not just roof panels) are central—canopies, wall panels, complex edge conditions, and metal integration throughout the envelope.
Maxwell is a true commercial player with a strong “service + fabrication” story. Their BBB profile explicitly states they provide commercial roofing services (new construction, replacement, and recover), offer 24/7 service for leaks, and have custom in-house metal fabrication. The “24/7 leak service” piece is practical for commercial ownership—especially if you manage a facility where water intrusion equals downtime, tenant issues, or inventory risk.
Their own site reinforces the fabrication message, stating that custom in-house metal fabrication is part of their offering. This is the type of contractor that often makes sense when your priority is a commercial operator that can both respond fast and produce the custom metal details that keep repairs from becoming recurring tickets.
Best fit: property managers and facilities teams who value a mature commercial service operation (especially emergency response) plus fabrication capability for metal details and transitions.
Empire Roofing’s Nashville operation is positioned specifically around commercial and industrial systems, and they emphasize preventative maintenance plans designed to extend roof life and help building managers forecast replacement timing. That forecasting + maintenance posture is a real advantage for commercial owners who want fewer surprises, better budgeting, and documented roof condition over time.
They also put a bright spotlight on sheet metal. Their sheet metal page states that they fabricate their own metal in their own metal shop with their own fabrication equipment and sheet metal workers—explicitly contrasting that approach with contractors who subcontract metalwork to third parties. And Tecta America’s Nashville location page for Empire Roofing lists metal roofs and custom sheet metal fabrication among their commercial offerings.
Best fit: commercial portfolios where maintenance planning matters, and projects where custom sheet metal fabrication is a key ingredient in doing the roof “right” instead of “fast.”
Austermiller markets commercial metal roofing in Greater Nashville, including standing-seam installs, repairs, and replacements, and they explicitly list the counties they serve. TeamCraft is a commercial roofing contractor with a Nashville presence and a published metal roof capability page for commercial metal systems. CentiMark has a Hendersonville office that services the Nashville area and publishes a commercial metal roofing division/system offering, which can be useful for larger portfolios and standardized multi-site programs.
